Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

755T6 Workshop Equipment

Vacuum forming workstation with integrated pump SAV 550

For a multifunctional application

Made to continue processing of heated material: The high-quality processing of the vacuum forming workstations is equipped to support orthopaedic technicians in modelling thermoplastics optimally. The vacuum is controlled with the foot pedal, while the water trap and particle filter protect the vacuum pump. In addition, special attention was paid to ensuring that enough shelves for the vacuum forming accessories are available.

Made to continue processing of heated material: The high-quality processing of the vacuum forming workstations is equipped to support orthopaedic technicians in modelling thermoplastics optimally. The vacuum is controlled with the foot pedal, while the water trap and particle filter protect the vacuum pump. In addition, special attention was paid to ensuring that enough shelves for the vacuum forming accessories are available.

With its compact design and thanks to the integrated vacuum pump, the vacuum forming and shaping workstation is particularly well suited for use in small workshops. It gives you extensive freedom of movement while working.

Voltage1x230 V
Frequency50-60 Hz
Performance100 l/min
All specifications
Functionality

All benefits at a glance

 

  • Compact and therefore space-saving
  • Integrated vacuum pump
  • Foot switch to control the vacuum
  • Vacuum filter to trap dust and other small particles and thus reduce the risk of operating failures
  • Stable steel construction
  • Delivery rate: 100 l/min or 6 m³/h
  • Vacuum pipe with exchangeable vacuum forming plate
Specifications

Product information

Voltage1x230 V
Frequency50-60 Hz
Performance100 l/min

Product Data

Article number755T6=1755T6=2
Version

Single version (vacuum pipe top and on the side)

Double version (vacuum pipe on both sides)

Equipment

Integrated vacuum pump, foot switch to regulate the vacuum,

upper vacuum forming tube folds 90°, tool shelf,

vacuum filter (to trap dust and other small particles - reduces

the risk of operating failures and pump downtime),

tank volume 15l, max. negative pressure -0.8 bar

1x vacuum pipe with two exchangeable vacuum forming plates

(1x diameter 230 mm and 1x diameter 330 mm)

1x exhaust tube

Integrated vacuum pump, foot switch to regulate the vacuum,

upper vacuum forming tube folds 90°, tool shelf,

vacuum filter (to trap dust and other small particles - reduces

the risk of operating failures and pump downtime),

tank volume 15l, max. negative pressure -0.8 bar

2x vacuum pipe with four exchangeable vacuum forming plates

(2x diameter 230 mm and 2x diameter 330 mm)

 

 

 

Size (W x D x H)1,000 mm x 450 mm x 1,100 mm1,500 mm x 450 mm x 955 mm
Electrical connection in V/Hz/kW1 x 230 / 50–60 / 0.251 x 230 / 50–60 / 0.25
Connecting cable4 m with two-pin earthed plug4 m with two-pin earthed plug
Delivery rate100 l/min 6 m³/h100 l/min 6 m³/h
Sound intensity level60 dB(A) dB (A)60 dB(A) dB (A)
ColourLight greyLight grey
MaterialSteelSteel
Weight80 kg82 kg
Accessories

Compatible accessories

Machinery-755X230
755X230Machinery
During vacuum forming, the thermoplastic material is applied directly over the cone-shaped vacuum pipe. Once the vacuum-formed model has cooled, it can be pulled off the adapter with just a few turns - it doesn't need to be cut free.
During vacuum forming, the thermoplastic material is applied directly over the cone-shaped vacuum pipe. Once the vacuum-formed model has cooled, it can be pulled off the adapter with just a few turns - it doesn't need to be cut free.