MyFit TT | The digital evolution of your craft

Benefits at a glance

Bring digital workflows to your below-knee treatments

O&P professional sitting with patient and marking anatomical landmarks on the liner for MyFit TT scan process

Indicate key anatomical landmarks

Prep for the digital design process by marking limb features that will help you generate an accurate 3D model, shape and position the trim line and optimize socket fit.

O&P professional holding Ottobock iFab EasyScan to scan residual limb for MyFit TT

Recording a high-fidelity 3D scan

Use iFab EasyScan or any other suitable scanning device to create a precise digital map of your patient’s residual limb.

Ottobock O&P professional with laptop using MyFitTT modelling software for socket design

Upload your scan and create an order

Log in to the iFab Customer Center (iCC), load your scan into the MyFit TT modelling software and indicate if you’d like to order a check or definitive socket.

Ottobock O&P professional employing MyFit TT modelling software on laptop to create a customized socket design

Digitally craft your patient’s socket

Once you define your markers, the software gives you even more control than you have with plaster. Modify alterations, pause and resume as well as undo changes at any time.

Display of MyFit TT modeling software screen with preset parameters

Follow a clinically guided workflow

The software provides a range of preset parameters based on your selected liner, the socket format and key characteristics of the patient’s residual limb. You can follow or modify them as needed.

Two O&P professionals projecting MyFit TT modelling software on beamer screen for socket design

Precisely align socket and adapter

During the design workflow you can define the exact alignment of your patient’s socket, including abduction/adduction, flexion/extension and/or rotational shift.

O&P professionals with laptop sending MyFit TT socket order for fabrication via the iFab Customer Center

Send your 3D model for fabrication

Once your socket design is ready, it takes just a few clicks to configure the check or definitive socket, complete your order and start the production process.

O&P professional kneeling in front of user fitting a MyFit TT check socket

Check their fit with a check socket

If you ordered a check socket and it fits just right, you can easily request a definitive socket based on the same 3D design. Make updates if needed, or simply submit a new order.

O&P professional fitting a 3D printed MyFit TT definitive socket to a user sitting on a chair

Have their definitive socket 3D-printed

Confident your design will deliver an optimal fit? Skip the check socket and simply order a definitive socket based on your final 3D model.

User Experience

Why professionals & patients love MyFit TT

“It makes our work much easier.”

When their practices decided to digitize TT fittings, Quentin & Mathis saw the benefits almost immediately: sockets that maximize patients’ comfort.

MyFit TT also brought a new level of efficiency to some of their essential daily workflows. “The software makes rectification and shaping the socket easier. Saving time in the workshop gives us more to spend with our patients.”

Quentin & Mathis, O&P professionals

“Like magic!”

An avid cyclist, Laurent knew he wanted a socket that helped keep him on the pedals. With his new MyFit TT socket, he was wowed by how comfortably and confidently he could pursue his favorite activities.

“With MyFit TT and its attachment system, I have a lot of flexibility. I can really bend it. It’s great for cycling. It’s magical!”

Laurent, MyFit TT user

Opens video: "MyFit TT user with 3D-printed socket using bike in a gym smiling"

“It makes our work much easier.”

When their practices decided to digitize TT fittings, Quentin & Mathis saw the benefits almost immediately: sockets that maximize patients’ comfort.

MyFit TT also brought a new level of efficiency to some of their essential daily workflows. “The software makes rectification and shaping the socket easier. Saving time in the workshop gives us more to spend with our patients.”

Quentin & Mathis, O&P professionals

“The transition is simple.”

Both these experienced O&P professionals were amazed by how quickly their colleagues could make the switch from plaster models to MyFit TT. “If you can click a mouse and modify a plaster model, you can use MyFit TT.”

The intuitive solution not only made it easy to digitize their TT workflows, it also gave the O&P professionals more time for what matters most. “It allows us to spend less time back in the lab and more time focused on our patients.”

Jeffrey & Ryan, O&P professionals

Opens video: "Ottobock O&P professional and patient trying on the 3D-printed MyFit TT socket"

“MyFit TT fits me 100 %.”

After losing his lower leg in a work accident, Beytullah looked for a socket that would give him the secure, stable fit he needed on the soccer field.

MyFit TT delivered exactly what he needed. Once he received his 3D-printed socket, “I felt reborn. I have my life back in control. I can do anything I want at any moment.”

Beytullah, MyFit TT user

Opens video: "Patient with MyFit TT on soccer field"

“In a word, it’s just ‘wow!’

With her busy, active life, Danuta wanted to keep her focus on her work, her family and her favourite activities – not her prosthesis. MyFit TT was the perfect solution.

She was amazed by the easy, efficient fitting process and her socket’s precision fit. “I’m an active person, and the comfort of walking in a prosthesis matters to me. Walking in a MyFit TT socket is an incredible experience. It gives you the peace of mind that a good prosthesis should.”

Danuta, MyFit TT user

Opens video: "Patient with 3D printed MyFit TT socket on her bicycle"

“I’m back to being me.”

After losing his leg in a motorcycle accident, Dilon could never find a socket with the fit he was looking for – until his O&P professional recommended MyFit TT.

His digitally designed socket delivered all the comfort and stability he needed, with an easy, efficient fitting process to boot. “The first time my O&P professional had me try on the check socket, it just fit. And not only did it fit, it felt better. I am so, so happy.”

Dilon, MyFit TT user

Opens video: "MyFit TT user with his son on a slide smiling"

“It’s wonderful for someone like me.”

Bruno lost a foot to type 2 diabetes, but wasn’t ready to let his amputation slow him down. His MyFit TT socket provided the safety and stability he needed to navigate his countryside home.

“It’s important for a prosthesis to have a good fit. You need to believe it’s your own leg. With a MyFit TT socket, my prosthesis feels like a part of me.”

Bruno, MyFit TT user

Opens video: "MyFit TT user sitting at a table with 3D-printed socket smiling"

“Like magic!”

An avid cyclist, Laurent knew he wanted a socket that helped keep him on the pedals. With his new MyFit TT socket, he was wowed by how comfortably and confidently he could pursue his favorite activities.

“With MyFit TT and its attachment system, I have a lot of flexibility. I can really bend it. It’s great for cycling. It’s magical!”

Laurent, MyFit TT user

“It makes our work much easier.”

When their practices decided to digitize TT fittings, Quentin & Mathis saw the benefits almost immediately: sockets that maximize patients’ comfort.

MyFit TT also brought a new level of efficiency to some of their essential daily workflows. “The software makes rectification and shaping the socket easier. Saving time in the workshop gives us more to spend with our patients.”

Quentin & Mathis, O&P professionals

Previous slide

Next slide

Functionality

Most important characteristics & advantages

Comprehensive below-knee workflow

MyFit TT combines everything O&P professionals need to digitize this critical part of today’s O&P treatment:

User-friendly modelling software that gives you full digital control of your socket designs

Versatile socket configurations, including both check sockets and definitive sockets with different suspension systems

A state-of-the-art fabrication process that brings a new level of efficiency to socket production

Ottobock O&P professional sitting on a desk smiling and typing on his laptop

State-of-the-art fabrication process

Whether you’re ordering a first test socket or ready for a definitive fitting, MyFit TT makes it easy to order the exact socket format, components, and and configuration you need:

- One-stop online hub for socket design, modification, and orders

- Socket selection and configuration in just a few clicks

- Timely production and delivery straight to your practice

Ottobock O&P professional looking and pointing at MyFit TT modelling software on computer screen

Comprehensive below-knee workflow

MyFit TT combines everything O&P professionals need to digitize this critical part of today’s O&P treatment:

User-friendly modelling software that gives you full digital control of your socket designs

Versatile socket configurations, including both check sockets and definitive sockets with different suspension systems

A state-of-the-art fabrication process that brings a new level of efficiency to socket production

User-friendly modelling software

MyFit TT is a powerful new way for you to harness the skills you’ve always relied on most. The intuitive digital design suite brings all the tools you need straight to your browser:

- An attribute-based model generated from a high-fidelity 3D residual limb scan

- Detailed control of socket dimensions, orientation, alignment, trim lines and more

- Integrated ordering process for check and definitive sockets

A look over the shoulder of an Ottobock O&P professional with laptop using MyFit TT modelling software

Versatile socket configurations

With MyFit TT, you can select from a wide range of options and socket components to optimize each socket for your patient – all from a single design and ordering procedure. Choose from:

- A ThermoLyn check socket and/or 3D-printed definitive socket

- Pin suspension system or vacuum system (passive or active)

- Multiple other options including valves, shuttle locks and adapters

Opens video: "Closeup and detail of 4-hole socket adapter of 3D printed MyFit TT definitive socket "

State-of-the-art fabrication process

Whether you’re ordering a first test socket or ready for a definitive fitting, MyFit TT makes it easy to order the exact socket format, components, and and configuration you need:

- One-stop online hub for socket design, modification, and orders

- Socket selection and configuration in just a few clicks

- Timely production and delivery straight to your practice

Comprehensive below-knee workflow

MyFit TT combines everything O&P professionals need to digitize this critical part of today’s O&P treatment:

User-friendly modelling software that gives you full digital control of your socket designs

Versatile socket configurations, including both check sockets and definitive sockets with different suspension systems

A state-of-the-art fabrication process that brings a new level of efficiency to socket production

Previous slide

Next slide

Specifications

Product information

Max. body weight	Mobility grade	Amputation level
125 kg	1, 2, 3, 4	Transtibial amputation

Product Data

Note
Please select items for "Attributes".

Downloads

Documents

FAQS

Answers for you

MyFit TT is a comprehensive solution for creating digitally designed check sockets and definitive sockets for transtibial prostheses. It includes:

Intuitive 3D modeling software for designing the sockets
A seamless, one-stop ordering and fabrication process
Versatile socket configurations, including both check and definitive formats

All MyFit TT check sockets and definitive sockets can be configured with a range of component options, including valves, shuttle locks and adapters. MyFit TT definitive sockets also include a universal, pre-aligned 4-hole connector.

For more information, please see the IFU.

MyFit TT check sockets may be modified in any way necessary to achieve the desired fit. They can be adjusted through heating, grinding or any other method you prefer.

MyFit TT definitive sockets may not be modified in any way that alters the physical structure of the socket.

MyFit TT definitive sockets are not intended for modification and may only be further modified at your own risk. Patches may be added if needed to correct interior spacing, but the socket should not be heated, ground or in any way physically altered. If a definitive socket requires adjustment, you should modify your 3D model and submit a new order through the ICC.