Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

Ottobock
Produktbild | Gesamtansicht 1:1 (farbig) 3D scanning spray 635L22
635L22 - Plaster and mold products

3D scanning spray

Optical scan of transparent, shiny or black components

The 3D scanning spray makes it possible to scan transparent, shiny or black surfaces that are normally not or only with difficulty to be captured by different scanners.

The 3D scanning spray makes it possible to scan transparent, shiny or black surfaces that are normally not or only with difficulty to be captured by different scanners.

For example, transparent surfaces on components for test fitting in prosthetics and orthotics can be optimally detected by scanners using the spray. The use of the scanning spray increases the contrast values and thus precise measurement results for orthopaedic technology are possible. The spray evaporates in just a few hours after application without leaving any traces whatsoever on the surface of the scanned component. The components require no time-consuming cleaning afterwards. This boosts efficiency and productivity during the measuring process.

The scanning spray forms a thin, white, homogeneous layer that creates ideal conditions for optical scanning, producing excellent scanning results.

All specifications
Functionality

All benefits at a glance

  • Self-evaporating 3D-Scanning Spray enables scanning of transparent, black or shiny components in prosthetics and orthotics

  • 3D-Scanning Spray forms an even and homogeneous coating for an opaque, matt white surface

  • White, non-slip coating evaporates automatically after scanning

  • Very good scanability

Processing instructions

  • Spray the entire surface to be scanned from a distance of about 20 cm
  • Move the spray can evenly to obtain a consistent coating
  • The spray is applied “wet”
  • Solvent evaporates within a few seconds while the active substance remains on the surface, creating a coating
  • The opacity of the white coating increases as the solvent evaporates
  • If drops form on the component or the applied coating stays “wet” for an extended time, increase the spraying distance or spraying speed
  • The ideal ambient temperature for processing is 21 °C
  • The object can be scanned after drying completely
  • Applied layers evaporate on their own after scanning (remove unevaporated residue from the component before it comes into contact with skin)

Product Data

Artikelnummer635L22=0.400
Nettoinhalt0.4 l