Planning and Equipping

Workshop equipment

Compact, functional and convenient – with a footprint of less than 2 m², the lamination workstation is especially suited to small workshops.
You’re just two steps away from the perfect result. The full power of the vacuum pump is available to you at the press of a button, and the lamination process can begin as soon as you open the shut-off valves.
The workstation is also equipped with an adjustable vacuum system and pressure gauge on both sides to ensure precise results. The vacuum can be generated from above or below to match your preferences and way of working, as the high-precision clamping devices can be extended or retracted as well as rotated by 360°.

The laminating island features a compact, well-conceived design. It has four fully equipped workstations with two vacuum connections each (one with variable vacuum), an Orthofix clamping device and an optional casting assist – while taking up minimal space.
The required roll material can be stored directly at the workstation for efficient laminating work. The mobile material cart with an integrated cutting surface is an additional aid. It also ensures materials and tools are always close to hand.
Workers’ health is also protected. Slots integrated in the laminating island extract vapours efficiently. A flexibly adjustable suction arm (optional) can also be attached.

The plaster drying oven is unlike any other in the world. It can dry plaster models faster and save more energy in the process by using the principle of condensation. As a result, orthopaedic workshops can substantially reduce the costs incurred during the fabrication of orthopaedic components such as prosthetic sockets. At the same time, it features high-quality workmanship, a functional design and more convenience.
The drying time is reduced by almost half! A comparative test has shown that the plaster drying oven takes 13 hours to dry test plaster models. By contrast, the convection oven requires a drying time of 24 hours. The test was carried out on six plaster models made of alabaster modelling plaster with a weight of 4 kg each and a plaster-to-water mixing ratio of 1:1.5.
The new Ottobock plaster drying oven is like no other in the world. It can dry plaster models faster and more energy-efficiently using the principle of condensation. As a result, orthopaedic workshops can substantially reduce the costs incurred during the fabrication of orthopaedic components such as prosthetic sockets. At the same time it features high-quality workmanship, functional design and more convenience.
Success through a shorter drying time
The drying time is reduced by almost half! A comparative test has shown that the new plaster drying oven takes only 13 hours to dry test plaster models. By contrast, the infrared convection oven requires a drying time of 24 hours for the same quantity and the same material.*
Positive feedback from practitioners
&#34;The new oven dries much faster,&#34; says Gerben Dokter, workshop manager of the orthopaedic company Gardeslen. &#34;We can have our plaster models dried in just one night – every night. Our weekly planning is now considerably more flexible and we save time.&#34;
*The comparative test was carried out on six plaster models made of alabaster modelling plaster with a weight of 4 kg each and a plaster-to-water mixing ratio of 1:1.5.

This highly modern suction booth features an integrated air curtain, providing optimum protection against chemical vapours – and enabling you to work at the front with clear vision at all times. When lamination resins are processed, harmful vapours and gases have to be extracted safely. In conjunction with a central explosion-proof box ventilator, you can now extract gases and vapours safely and conveniently. The fresh air curtain at the front prevents gases and vapours from entering the work room. In this way, you can work optimally at the front with the best view and no impairments by a protective window. Integrated explosion-proof lighting guarantees first-class illumination of the workplace.

The lamination workstation enables users to work simultaneously, provides extremely effective vapour protection and offers you remarkably flexible adjustment possibilities. Depending on the version, two, three or even four workstations give you the opportunity to continue working on another project while you wait for a model to cure.

This multifunctional station for casting and laminating comes perfectly equipped for the efficient production of orthopaedic devices such as laminated sockets. When connected to a central suction system or equipped with an explosion proof top-mount fan, the integrated suction slots and continuous edge suction on the worktop ensure ultimate safety at all times. Plus, vapours can also be removed right where they arise using the optional suction arm.

Choose a shipping address

Discount information

{count } {count, plural, one { item } other { items }} in your shopping cart cannot be ordered

Contact customer service

An error has occurred.

Shopping Cart ({number, plural, =0 {no items} one {# item} other {# items}})

Place order now

The maximum number of characters is {maxLength}

The purchase order number must be unique for all orders.

You can add a product directly here or browse through our products. As soon as you have added products to your shopping cart, they will be displayed here.

Add item to cart

Are you sure you want to remove all items from the shopping cart?

Empty the shopping cart completely?

Are you sure you want to remove the product from your shopping cart?

Delete item from cart?

Subcategories

Contact & support

Get in touch with us to order

Convert this quote into an order

Your quote could not be loaded

Please wait...

Your order could not be placed

Your order has been placed successfully.

Configuration completed

All filters

Filter options

MPKs & selected products

Your organization is managed externally via the Ottobock ID

Organization

Services for you

My Services

Order history

Your quote request could not be created

Your request has been submitted successfully

Your request is currently being reviewed

Request a quote

Your profile is managed externally via the Ottobock ID

Profile

Your request has been rejected

Your quote has expired

Your request could not be submitted

notification new - headline

This quote cannot be converted into an order

Quotation status

Filter quotes

Quote history

Reimbursement

Return items ({amount})

Select items to return

Add item

Edit item

We could not find any items with these attributes. Please expand your search.

No items found

No items eligible for return.

We could not find any items with these attributes. Please see list of all items.

No items selected for return

Remove from return list

Please remove unreturnable items before submitting a return.

Unreturnable items selected for return

Please wait

Review and submit your return

Are you sure you would like to remove this item from your shopping returns?

Delete item from returns?

Return has been successfully created

Enclose the correct return document with each parcel. Make sure that the return number matches the items in the parcel.

Add return document

Pack your items securely. You can use one or more boxes. Keep items with the same return number together.

Pack your items

Download and print out your return documents. Each return number has its own PDF file and barcode.

Print out your return documents

Send your package(s) to the address shown on the return label.

Send your return

Packing and shipping:

Please print this page and attach it to your return.

Please follow the instructions below to ensure your return can be processed without delay.

Please find the details for each return and its items below.

This return is split into multiple returns.

Pack & ship

We'll check eligibility and issue a credit note if approved

Review & credit

Select returnable items

Submit return request

Please follow the steps below to complete your return.

Create a return

Returns

Please print this page and attach it to your return. First, separate the section with the barcode and the RMA number and stick it on the outside of your package.

Printable return information

Are you sure you want to cancel?

Save cart

Edit cart

Share cart within the organization

You can find it in your <link>Saved cart</link> list.

Cart successfully shared

Delete saved cart

Restore saved cart

No prices are displayed in the saved cart. Current prices and availabilities are determined in the active cart.

Saved shopping carts

No prices are displayed in saved carts. Prices and availabilities are determined after restoring a saved cart.

Select shipping method

Switch your organization

An error occurred while changing the default organization. Please try again or contact your <support>customer service</support>.

You have successfully changed your default organization and are now using the store linked to the selected customer.