Planning and Equipping

Machinery

The Pedilan vacuum forming plate surface prevents the plastic from sticking to the vacuum forming plate. The vacuum tube is also equipped with a quick-change system for exchanging the vacuum forming plate. This saves storage space, and the vacuum tube can remain clamped in place at all times as well.

This vacuum pump offers everything you’d expect from a cutting-edge vacuum pump: It’s durable, powerful, reliable, quiet, energy efficient and boasts a modern design.
At the same time, the 755E71 Vac M12 vacuum pump has a broad range of applications. The all-rounder has a suction capacity of 12 m³/h and can be used for both laminating and vacuum-forming tasks. It can be used either as a central supply point for a number of workstations or as a mobile solution for a single workstation.
The vacuum pump’s full potential can ultimately be put to best use in combination with the Ottobock vacuum-forming and lamination workstations. Matching it with a vacuum tank and pressure regulators puts its entire range of benefits at your disposal.
The vacuum pump is always the right choice for completing any job in the orthopaedic workshop with maximum precision.

Our goal is to provide you with the best possible support for your work. This is what pushes us to continue developing our products. Our goal: Keep what’s been proven to work and further enhance it with innovations. One example is our vacuum system, where we combine reliable technology such as the motor and its pump together with an innovative control system and a modern design – for even more precise laminating results.

During vacuum forming, the thermoplastic material is applied directly over the cone-shaped vacuum pipe. Once the vacuum-formed model has cooled, it can be pulled off the adapter with just a few turns - it doesn&#039;t need to be cut free.

By replacing the traditional vacuum pipe on the vacuum forming tables with a vacuum forming adapter that includes a vacuum forming plate, you can have even more room to manoeuvre.
The vacuum forming adapter consists of a vacuum pipe with a vacuum forming plate (diameter 360 mm), which can be mounted on either the left and/or right side of the vacuum forming table. The adapter also comes equipped with a foot pedal and a water trap. You can individually adjust the vacuum forming plate to your ideal working height, so you can vacuum form the heated plastic over the plaster model and remodel it as quickly as possible.
Thanks to a click system, the vacuum forming plate can be easily replaced in a matter of moments. 180 mm and 260 mm diameter versions are available separately.

Välj en leveransadress

Varukorg ({number, plural, =0 {inga artiklar} one {# artiklar} other {# artiklar}})

Lägg en beställning nu

Du kan lägga till en produkt direkt här eller bläddra bland våra produkter. Så snart du har lagt till produkter i din varukorg kommer de att visas här.

Lägg till artikel i varukorgen

Är du säker på att du vill ta bort produkten från kundkorgen?

Ta bort produkten från varukorgen?

Orderhistorik

Din profil hanteras externt via Ottobock ID

Profil

Returnera artikel ({amount})

Är du säker på att du vill ta bort den här artikeln från din retur?

Ta bort varan från returen?

Returen har skapats

Förpackning och avsändning:

Vänligen skriv ut denna sida och bifoga den med din retur.

Returnerar

Skriv ut den här sidan och bifoga den med din retur. Ta först bort delen med streckkoden och RMA-numret och klistra fast den på utsidan av paketet.

Returinformation för utskrift

Vill du avbryta processen?

Spara varukorg

Ändra varukorg

Dela din kundvagn inom organisationen

Du hittar den i din lista <link>Sparade kundvagnar</link>.

Shoppingkorgen har delats framgångsrikt

Ta bort sparad varukorg

Återställ sparad kundvagn

Inga priser visas i den sparade kundkorgen. Aktuella priser och tillgänglighet bestäms i den aktiva kundkorgen.

Sparade kundvagnar

Sparade varukorgar visar inte priser. Priser och tillgänglighet bestäms efter att en sparad kundvagn har återställts.