Planning and Equipping

Workshop equipment

Compact, functional and convenient – with a footprint of less than 2 m², the lamination workstation is especially suited to small workshops.
You’re just two steps away from the perfect result. The full power of the vacuum pump is available to you at the press of a button, and the lamination process can begin as soon as you open the shut-off valves.
The workstation is also equipped with an adjustable vacuum system and pressure gauge on both sides to ensure precise results. The vacuum can be generated from above or below to match your preferences and way of working, as the high-precision clamping devices can be extended or retracted as well as rotated by 360°.

The laminating island features a compact, well-conceived design. It has four fully equipped workstations with two vacuum connections each (one with variable vacuum), an Orthofix clamping device and an optional casting assist – while taking up minimal space.
The required roll material can be stored directly at the workstation for efficient laminating work. The mobile material cart with an integrated cutting surface is an additional aid. It also ensures materials and tools are always close to hand.
Workers’ health is also protected. Slots integrated in the laminating island extract vapours efficiently. A flexibly adjustable suction arm (optional) can also be attached.

The plaster drying oven is unlike any other in the world. It can dry plaster models faster and save more energy in the process by using the principle of condensation. As a result, orthopaedic workshops can substantially reduce the costs incurred during the fabrication of orthopaedic components such as prosthetic sockets. At the same time, it features high-quality workmanship, a functional design and more convenience.
The drying time is reduced by almost half! A comparative test has shown that the plaster drying oven takes 13 hours to dry test plaster models. By contrast, the convection oven requires a drying time of 24 hours. The test was carried out on six plaster models made of alabaster modelling plaster with a weight of 4 kg each and a plaster-to-water mixing ratio of 1:1.5.
The new Ottobock plaster drying oven is like no other in the world. It can dry plaster models faster and more energy-efficiently using the principle of condensation. As a result, orthopaedic workshops can substantially reduce the costs incurred during the fabrication of orthopaedic components such as prosthetic sockets. At the same time it features high-quality workmanship, functional design and more convenience.
Success through a shorter drying time
The drying time is reduced by almost half! A comparative test has shown that the new plaster drying oven takes only 13 hours to dry test plaster models. By contrast, the infrared convection oven requires a drying time of 24 hours for the same quantity and the same material.*
Positive feedback from practitioners
&#34;The new oven dries much faster,&#34; says Gerben Dokter, workshop manager of the orthopaedic company Gardeslen. &#34;We can have our plaster models dried in just one night – every night. Our weekly planning is now considerably more flexible and we save time.&#34;
*The comparative test was carried out on six plaster models made of alabaster modelling plaster with a weight of 4 kg each and a plaster-to-water mixing ratio of 1:1.5.

This highly modern suction booth features an integrated air curtain, providing optimum protection against chemical vapours – and enabling you to work at the front with clear vision at all times. When lamination resins are processed, harmful vapours and gases have to be extracted safely. In conjunction with a central explosion-proof box ventilator, you can now extract gases and vapours safely and conveniently. The fresh air curtain at the front prevents gases and vapours from entering the work room. In this way, you can work optimally at the front with the best view and no impairments by a protective window. Integrated explosion-proof lighting guarantees first-class illumination of the workplace.

The lamination workstation enables users to work simultaneously, provides extremely effective vapour protection and offers you remarkably flexible adjustment possibilities. Depending on the version, two, three or even four workstations give you the opportunity to continue working on another project while you wait for a model to cure.

Made to continue processing of heated material: The high-quality processing of the vacuum forming workstations is equipped to support orthopaedic technicians in modelling thermoplastics optimally. The vacuum is controlled with the foot pedal, while the water trap and particle filter protect the vacuum pump. In addition, special attention was paid to ensuring that enough shelves for the vacuum forming accessories are available.
With its compact design and thanks to the integrated vacuum pump, the vacuum forming and shaping workstation is particularly well suited for use in small workshops. It gives you extensive freedom of movement while working.

This means that a central vapour extraction system is no longer necessary, making this workstation an especially worthwhile acquisition for smaller orthopaedic operations. Vapours occurring during adhesives work, which are explosive and hazardous to health, are extracted by an integrated ATEX-certified fan and transported outside via a separate duct system. The explosion-protected fan is housed in the lower cabinet of the adhesives workstation, which also features drawers for smaller work tools. A multiplex worktop with an integrated cutting and adhesives worktop and edge suction system gives the work station an attractive appearance that&#039;s also highly functional.
The cutting and adhesives worktop made of high-strength HMPE (high-modulus polyethylene) is especially resistant to adhesive materials and is exceptionally well-suited as a surface for carrying out cutting work. The worktop can also be used on both sides and easily replaced with a new one when it is worn out. The cutting and adhesives worktop is bordered by an edge extraction system into which the heavy adhesive vapours (heavier than air) sink downwards and are extracted through the integrated explosion-protected fan.

Choose a shipping address

Discount information

{count } {count, plural, one { item } other { items }} in your shopping cart cannot be ordered

Contact customer service

An error has occurred.

Shopping Cart ({number, plural, =0 {no items} one {# item} other {# items}})

Place order now

You can add a product directly here or browse through our products. As soon as you have added products to your shopping cart, they will be displayed here.

Add item to cart

Are you sure you want to remove all items from the shopping cart?

Empty the shopping cart completely?

Are you sure you want to remove the product from your shopping cart?

Delete item from cart?

Contact & Support

Get in touch with us to order

Convert this quote into an order

Your order could not be placed

Please wait...

Your order has been placed successfully.

Configuration completed

MPKs & selected products

Your organization is managed externally via the Ottobock ID

Organization

Order history

Your quote request could not be created

Your request has been submitted successfully

Your request is currently being reviewed

Request a quote

Your profile is managed externally via the Ottobock ID

Profile

Your request has been rejected

Your quote has expired

Your request could not be submitted

notification new - headline

Quotation status

Filter quotes

Quote history

Reimbursement

Return items ({amount})

Are you sure you would like to remove this item from your shopping returns?

Delete item from returns?

Return has been successfully created

Packing and shipping:

Please print this page and attach it to your return.

Returns

Please print this page and attach it to your return. First, separate the section with the barcode and the RMA number and stick it on the outside of your package.

Printable return information

Are you sure you want to cancel?

Save cart

Edit cart

Share cart in your organization

You can find it in your <link>Saved cart</link> list.

Cart successfully shared

Delete saved cart

Restore saved cart

No prices are displayed in the saved cart. Current prices and availabilities are determined in the active cart.

Saved shopping carts

No prices are displayed in saved carts. Prices and availabilities are determined after restoring a saved cart.

Select shipping method

Switch your organization

An error occurred while changing the default organization. Please try again or contact your <support>customer service</support>.

You have successfully changed your default organization and are now using the store linked to the selected customer.