Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

5Z17 - Lamination Technology

Container preform

Efficient reinforcement for prosthetic sockets

Preforms represent a new generation in transfemoral socket fabrication.

Preforms represent a new generation in transfemoral socket fabrication.

Highly rigid frame and container sockets can be produced with little effort by using precut carbon elements.

MaterialCarbon
ColourBlack
Contents1 Piece(s)
WeightMax. 150 kg
Order unitSet
Product typeReinforcement materials
All specifications
Functionality

All benefits at a glance

  • Clean and easy processing

  • Pre-determined layer structure

  • Simplified fabrication and less time to fabricate a socket

  • Waste of expensive reinforcement materials is minimised

  • Simplified quantity control in comparison to rolled and sheet goods

Processing instructions

  • Apply the M/L section with the short side oriented medially. Round the edges when shortening to the correct length.
  • Wrap around the radial section: position the reinforcement triangle medially in the perineum with the point towards the end of the residual limb. The radial section can be used for left-hand (carbon on the outside) and right-hand (carbon on the inside) sockets. Perform the first casting with the M/L section and the radial section.
  • Attach the anchor and position the faces of the star so they are centred over the anchor arms. Perform the second casting with the anchor and star.

 

The carbon preforms can be processed with all Ottobock resins.

Specifications

Product information

MaterialCarbon
ColourBlack
Contents1 Piece(s)
WeightMax. 150 kg
Order unitSet
Product typeReinforcement materials

Product Data

Article numberDescriptionDimension ADimension BDimension CPackage contentsQuantity unit
5Z16=280X700X150Frame preform280 mm370 mm700 mmThree preforms for fabricating a prosthetic socketSet
5Z16=350X700X150Frame preform350 mm500 mm700 mmThree preforms for fabricating a prosthetic socketSet
5Z17=280X700X150Container preform280 mm370 mm700 mmThree preforms for fabricating a prosthetic socketSet
5Z17=350X700X150Container preform350 mm500 mm700 mmThree preforms for fabricating a prosthetic socketSet
Related products

Find similar products

Lamination Technology-5Z16
5Z16Lamination Technology
Preforms represent a new generation in transfemoral socket fabrication.Highly rigid frame and container sockets can be produced with little effort by using precut carbon elements.
Preforms represent a new generation in transfemoral socket fabrication.Highly rigid frame and container sockets can be produced with little effort by using precut carbon elements.