Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

617H119 Lamination Technology

Orthocryl lamination resin 80:20 PRO

Optimal penetration of the reinforcement

Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and colour pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.

Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and colour pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.

The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.

MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
Use casesDefinitely socket production, Definitely orthosis production
All specifications
Functionality

All benefits at a glance

  • Rapid evacuation of air from the reinforcement

  • Air that is evacuated and subsequently rises can be released from the resin during lamination

  • Air is not trapped in the resin. This improves the stability of the end result

  • Hardener/colour pastes are easy to mix

Safety instructions

For further information on the safety instructions, please see the corresponding Ottobock safety data sheet.

 

Mixing ratio:

Resin 100 : hardener 2–3 : pigment paste 3

Specifications

Product information

MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
Use casesDefinitely socket production, Definitely orthosis production
Product typeAcrylic lamination resins
Order unitStück
Amputation levelTransfemoral amputation, Transradial amputation, Transtibial amputation, Transhumeral amputation

Product Data

Article numberDescriptionNet contents
617H119=0.900Orthocryl lamination resin 80:20 PRO0.9 kg
617H119=4.600Orthocryl lamination resin 80:20 PRO4.6 kg
617H119=25Orthocryl lamination resin 80:20 PRO25 kg