Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

Ottobock
Product image | Overall view 1:1 (in colour) C-Orthocryl 617H55
617H55 - Lamination Technology

C-Orthocryl


C-Orthocryl is a laminating resin for the production of solid components with a high carbon fibre content in prosthetics and orthotics. The curing time can be shortened by adding Orthocryl laminating resin 80:20 Speed.

C-Orthocryl is a laminating resin for the production of solid components with a high carbon fibre content in prosthetics and orthotics. The curing time can be shortened by adding Orthocryl laminating resin 80:20 Speed.

MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
Use casesDefinitely socket production, Definitely orthosis production
All specifications
Request information
Functionality

All benefits at a glance

  • Laminating resin for carbon fibre technique

  • Enables the production of components with low resin content

  • Optimum ratio of matrix to reinforcing materials

  • Can be combined with all common reinforcement materials used in orthopaedic technology

  • Hardeners/ color pastes can be mixed without any problems

Tip

  • No filter layers are required when casting carbon on carbon
  • For sheet casting, use only 616F4 PVA film or 99B81 PVA bags

 

Safety instructions: 

For further information on the safety instructions, please see the corresponding Ottobock safety data sheet.

 

Mixing ratio:

Resin 100 : hardener 2–3 : pigment paste 3

Specifications

Product information

MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
Use casesDefinitely socket production, Definitely orthosis production

Product Data

Article numberDescriptionNet contents
617H55=0.900C-Orthocryl0.9 kg
617H55=4.600C-Orthocryl4.6 kg
Related products

Find similar products

Lamination Technology-617H119
617H119Lamination Technology

Orthocryl lamination resin 80:20 PRO

Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and colour pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.
Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and colour pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.
Product details›