Details

Recent product changes and updates

Scroll down, or click on the links to go to the product area of interest.

Veteran and bilateral Genium X4 user Dave Henson walks on a pebble beach holding hand with his young daughter against an ocean backdrop.

Lower Limb prosthetics

Lower Limb prosthetics

Lower Limb prosthetics

C-leg new feature - intuitive cycling mode

2025-11-21 | Product update

Intuitive cycling for C-Leg can now be activated by the CPO in connectgo.pro. Once activated, the user can, if needed disable the function in the user app.

When enabled by the CPO:

  • Automatic activation: After a couple of cycling turns on the bike the C-Leg recognizes the cycling mode and gives feedback with a short beep and vibration signal.

  • Automatic deactivation: From the sitting position on the bike, extend the knee joint or place the foot on the ground. Feedback with a short beep and vibration signal is provided.

Link to YouTube demo video

Link to Dowloads Lower Limb and C-leg Product Brief


Increased IP rating for Kenevo

2025-11-21 | Product update

Kenevo is now weatherproof (IP 54). The knee is now protected against splashed water from all directions. This applies to all 3C60=5* / 3C60=ST-5* units including the Axon tube adapter 2R17 used together with Kenevo.

Link to Dowloads Lower Limb and Kenevo Product Brief


connectgo.pro compatibility with Kenevo A-B-C

2025-11-21 | App update

New role added – therapists

All functions of Kenevo A-B-C are now available in connectgo.pro + more, for example:

  • Save settings at a specific point manually

  • View previous settings

  • Export settings as textfile

  • Create basic activity report

  • Check prosthesis status and Bluetooth-Pin

Please note: the Kenevo ABC will be removed from app stores end of 2025.

Link to Dowloads Lower Limb and Kenevo Product Brief and the Kenevo A-B-C onepager


Product Discontinuation Harmony E2 (4R152)

2025-10-20 | Product Discontinuation

The Harmony E2 is an electronic pump for the Harmony system. It provides volume management on the residual limb, enhanced prosthetic suspension and reduced forces in the socket.

4R152 Harmony E2 and 4R152=1 Harmony E2 with Adapter Plate will be officially discontinued October 20th, 2025.

Spare parts will be available for the next three years to support existing installations. We also aim to maintain service and technical support for the discontinued product during this period as best as possible.

There is no direct 1:1 successor to Harmony E2. However, the following mechanical pumps can be offered to customers as suitable alternatives:

  • 4R180 Harmony P4

  • 4R181 Harmony P4 HD

  • 4R182 Harmony P4 modular

  • 4R183 Harmony P4 HD modular

In applications with limited build height, our feet with integrated pump may also be considered as a viable solution:

  • 1C52 Taleo Harmony

  • 1C62 Triton Harmony


Quick Change

2025-08-20 | Tips & Tricks


Evanto Cleaning Guide

2025-08-20 | How to reduce or eliminate noise

A common cause of noise when using Evanto is sand or dust. The Evanto Cleaning Guide outlines how to clean and maintain the prosthetic foot to prevent noise and ensure optimal performance.

Link to Evanto Cleaning Guide


Maverick Xtreme AT & Maverick Comfort AT

2025-08-01 | Now produced with Ottobock standard pyramid

With the start of August, both the F21 Maverick Xtreme AT and F22 Maverick Comfort AT will be produced with our Ottobock standard pyramid that you know from our Taleo feet (F23 Maverick VS remains unchanged).

The pyramid now has the same dimensions as all other OB feet, drain channels and a slightly different product weight.

Please be aware that there will be a mixed stock depending on size, side and stiffness for the next months.

Link to Downloads where you can find the updated Product Briefs


Taleo Adjust Update

2025-07-31 | Updated version

What's new?

  • Ankle material changed from titanium to aluminium resulting in a lower product weight

  • Slightly new design

  • Heel height adjustment tested and approved 0-7 cm for all foot sizes

Link to Product Brief & Order Form


connectgo.pro app - now compatible also with Genium and Genium X3

2025-06-26 | App Update


connectgo.pro is the new set-up app for O&P professionals to quickly and conveniently program Ottobock microprocessor knees.

The app was launched together with Genium X4 and C-leg Update and later also for Kenevo. Now we are happy to announce the most recent version (1.5) is compatible with Genium and Genium X3 as well. Additional products will be added through regular updates.

Some of the general features:

  • Easy and direct connection - no computer or Bluetooth dongle required

  • Complete set-up of the prosthesis

  • Quick access to training videos

  • Select and customize MyMode settings

  • iOS and Android compatible

New for version 1.5:

  • Welcome pages describing new functions

  • New home page and tab bar

  • Genium & Genium X3 set-up (supports all current Genium and Genium X3 sold or serviced after January 2021)

  • Improved Static alignment/CAA animation (also for X4)

  • Updated list of prosthetic feet

  • Guided shut down process

  • Manual storage option

  • Option to change prothesis name

  • Improved sliders, icons and text

  • Various bug fixes


Kenevo Update

2025-06-03 | Updated version

What's new?

  • New article numbers: 3C60=5 & 3C60=ST-5

  • Changed pyramid inclination from 5° to 0° (to facilitate the exchangeability of knee joints)

  • New battery caps (same as C-leg)

Find more info and updated Kenevo Product Brief and Order Form here


Now Available: Small footshells for Taleo Adjust & Taleo Adapt

2025-06-02 | New product

  • Slim and low cut

  • Available in beige, light brown and black, sizes 22-27

  • New toe design for more natural look

  • Paintable nails

  • No connection cap due to shape of footshell


Find Taleo Adjust & Adapt product briefs here


3R80 Update

2025-04-15 | Updated version

What's new?

  • New modern design (grey instead of blue)

  • Robust and durable protector to withstand different environmental situations

  • Pyramid adapter with sacrificial anode (same as Dynion)

  • Optimised water drain in the lower part

  • Different seal in the bearing cover

  • Swivel piston with wear-resistant/corrosion-resistant coating

  • Spring and connection cap now have reliefs for improved water drainage

  • Exchange of extension stops can now be conducted by CPO

3R80 pyramid version: switch took place cw 16.
3R80=ST screw top version: the switch will take place last week of April/first week of May (cw 18/19).


New look: Pediatric structural components

2025-03-14 | New color
With the recently launched prosthetic foot Maverick junior and the knee joint movido it is time for new structural components design. The current red color will be replaced by a neutral silver color.

The following structural components are affected (all article numbers remain the same):

  • 2R40=2 Foot adapter with screw connection

  • 2R41=1, 2R41=2 Tube adapter

  • 2R48 Tube adapter, angled

  • 4R66 Tube clamp adapter

  • 4R60 Socket adapter

  • 4R110 Lamination anchor with pyramid receiver

The first neutral units of 4R60 are already available from stock. All other articles will be switched as soon as the current inventory of red components is used up. Depending on the article number this might take until Q4 2025.


connectgo.pro app - now compatible with Kenevo

2025-02-05 | Kenevo setup
connectgo.pro is the new set-up app for O&P professionals to quickly and conveniently program Ottobock microprocessor knees.

The app was launched together with Genium X4 and C-leg Update. Now we are happy to announce the most recent version (1.4) is compatible also with Kenevo. Additional products will be added through regular updates.

Some of the general features:

  • Easy and direct connection - no computer or Bluetooth dongle required

  • Complete set-up of the prosthesis

  • Quick access to training videos

  • Select and customize MyMode settings

  • iOS and Android compatible

Additional for Kenevo:

  • Setup of acoustic training feedback

  • Activation of manual lock function

Read more


Updates to the C-leg Certification Material (latest version 1.13)

2025-02-03 | New certification material

Summary of main updates:

  • New information regarding the setup process via connectgo.pro app (for Android and iOs)

  • Updated list of approved feet combinations

  • Introduction and explanation of the ‘Manual Locking’ function as well as how to activate/deactivate the function via connectgo.pro

The updated C-leg certification material is found in myLearning by Ottobock, the Global Academy online learning platform.

To get access to the latest training material please contact your dedicated Ottobock trainer (note that self-registration or self-enrolment is not possible).

Ottobock can provide training for the updated certification material if required, please contact your local Ottobock Trainer/Sales representative.

If you have additional questions or comments regarding this matter, please feel free to contact us.


New products: Maverick junior & movido

2025-01-17 | New product for children
New Maverick junior prosthetic foot (F24) & movido knee  (3R68) – The adventure companions for kids!
Read more


Prosthetic Foot Guide

2025-01-02 | Foot Guide
Have a look at our recently launched Prosthetic Foot Guide, a digital tool designed to streamline the process of selecting the right prosthetic foot. This user-friendly online guide allows you to quickly and easily narrow down the best prosthetic foot options based on specific characteristics and preferences.
Link to Guide


Foot Portfolio Poster

2025-01-02 | Posters
Our most recent member in our poster family is the Foot Portfolio Poster. Here you get an overview of all our prosthetic feet, their maximum body weight, available sizes, build heights and mobility grades. Other posters which you can order from us are; Liner Portfolio Poster, Kenevo ABC Training Poster, Genium X4 lifestyle posters, C-leg lifestyle poster and Kenevo lifestyle Poster.


Upper Limb prosthetics

Upper Limb prosthetics

Phase-Out of body powered trans humeral components

2025-09-29 | Product Phase-Out
The following two pper Limb body-powered components has been discontinued earlier than planned due to a single large order that depleted all remaining stock.

  • 16Y27 – Joint Piece with Cable Lock

  • 12K27 – Elbow Component with Cable Lock


Skeo Up Daily Assist Demo Set

2025-01-10 | New Demo Set
We are happy to announce that the Skeo Up Daily Assist Demo Set now is available for ordering. The set includes demo products in the 5 different sizes and comes in a bag. Article number 14Y6=1.


New updated Upper Limb Catalogue

2024-12-02 | UL Catalogue
Check out the digital version of our updated Upper Limb Catalogue. Also available in print version.
Link

Orthotics & Neuromodulation

Orthotics & Neuromodulation


Product teaser: C-Brace Interim Solution (CBI)

2025-04-23 | A Groundbreaking Tool for Evaluation and Early Rehabilitation with C-Brace
We are excited to introduce a powerful new addition to our offering: the C-Brace Interim Solution (CBI) – a concept developed to support verticalization and mobilization in the early stages of rehabilitation. In addition to supporting clinical practice, CBI serves as a long-term evaluation tool specifically designed for users within neurorehabilitation.

Being a partly custom-made and partly prefabricated KAFO, CBI offers an innovative approach designed to streamline workflows for healthcare professionals while enhancing patient outcomes. With CBI, both clinicians and patients benefit from a more individualized and efficient care process.
Stay tuned!

New: Nexgear family

2025-01-17 | New products
The Nexgear range includes five orthotic joints made of titanium or steel in numerous variants. The product range also includes accessories for comprehensive, high-quality AFO/KAFO fitting options.
Read more