Passive Vacuum Socket Systems.
How do passive vacuum sockets work?
Passive vacuum systems usually consist of a soft liner, a one-way valve and a knee sleeve. Excess air is expelled through the valve with the help of body weight and is unable to stream back in.
A knee sleeve is used with transtibial prostheses to create an airtight seal at the top edge of the system. In transfemoral prostheses, the Sealing Liner ring is used to create an airtight seal at the top of the system.
Passive vacuum, also referred to as a ‘one-way valve’, provides a high level of socket comfort when a vacuum is created between the suspension sleeve and the liner/skin. When the amputee begins to walk the air is driven out of the socket to form a solid connection.
Want to know more? Contact us using the form below.
Discover more socket technologies.
Active Vacuum
Active vacuum provides the ultimate socket comfort by means of a pump unit creating a vacuum between the suspension sleeve and the liner.
Active vacuum provides the ultimate socket comfort by means of a pump unit creating a vacuum between the suspension sleeve and the liner.
Pin Lock
This type of connection is formed between the socket and the residual limb via a pin at the end of the liner which locks into the bottom of the prosthetic socket. No suspension sleeve is required with this system.
This type of connection is formed between the socket and the residual limb via a pin at the end of the liner which locks into the bottom of the prosthetic socket. No suspension sleeve is required with this system.
2 results out of 2