Confirm your location

Confirm you location or select from a list of countries in order to get in touch with your local Ottobock market. We will make sure you´re redirected to your selected site in the future so you´ll always be in the right place.

617H55 Lamination Technology

C-Orthocryl


MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
UseDefinitive socket production, Definitive orthosis production
All specifications
Functionality

Tip

  • No filter layers are required when casting carbon on carbon
  • For sheet casting, use only 616F4 PVA film or 99B81 PVA bags

 

Safety instructions: 

For further information on the safety instructions, please see the corresponding Ottobock safety data sheet.

 

Mixing ratio:

Resin 100 : hardener 2–3 : pigment paste 3

Specifications

Product information

MaterialAcrylic
Scope of applicationOrthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb
UseDefinitive socket production, Definitive orthosis production

Product Data

Article numberDescriptionNet contents
617H55=0.900C-Orthocryl0.9 kg
617H55=4.600C-Orthocryl4.6 kg
617PG37=0.150GreenLine phthalate-free hardening powder0.15 kg
617P37=0.150Hardening Powder0.15 kg
Related products

Find similar products

Lamination Technology-617H119
617H119Lamination Technology
Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and color pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.
Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and color pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.