617H55 - Lamination Technology
C-Orthocryl
C-Orthocryl is a laminating resin for the production of solid components with a high carbon fiber content in prosthetics and orthotics. The curing time can be shortened by adding Orthocryl laminating resin 80:20 Speed.
C-Orthocryl is a laminating resin for the production of solid components with a high carbon fiber content in prosthetics and orthotics. The curing time can be shortened by adding Orthocryl laminating resin 80:20 Speed.
| Material | Acrylic |
| Scope of application | Orthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb |
| Use | Definitive socket production, Definitive orthosis production |
Functionality
Tip
- No filter layers are required when casting carbon on carbon
- For sheet casting, use only 616F4 PVA film or 99B81 PVA bags
Safety instructions:
For further information on the safety instructions, please see the corresponding Ottobock safety data sheet.
Mixing ratio:
Resin 100 : hardener 2–3 : pigment paste 3
Specifications
Product information
| Material | Acrylic |
| Scope of application | Orthosis lower limb, Orthosis upper limb, Prosthesis lower limb, Prosthesis upper limb |
| Use | Definitive socket production, Definitive orthosis production |
Product Data
| Article number | Description | Net contents |
|---|---|---|
| 617H55=0.900 | C-Orthocryl | 0.9 kg |
| 617H55=4.600 | C-Orthocryl | 4.6 kg |
Related products
Find similar products
617H119Lamination Technology
Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and color pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.
Orthocryl Lamination Resin 80:20 PRO is a lamination resin for the fabrication of components with a low proportion of resin. It has a lower viscosity than Orthocryl Lamination Resin 80:20 (617H19) but the same mechanical characteristics. Thanks to the lower viscosity the reinforcement material can be penetrated more effectively, allowing air to escape faster from the reinforcement. Hardener and color pastes are easier to mix with Orthocryl Lamination Resin 80:20 PRO.The reinforcement materials are soaked more effectively when processing with Orthocryl Lamination Resin 80:20 PRO (617H119) instead of Orthocryl Lamination Resin 80:20 (617H19). The air that is pushed out and subsequently rises can escape from the resin during lamination and is not locked into the resin. This increases the quality and stability of the end result.
